View NCS2584DTBR2G_5139076.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? semiconductor components industries, llc, 2012 august, 2012 ? rev. 0 1 publication order number: ncs2584/d ncs2584 four-channel video driver with load detection and signal detection the ncs2584 is a 4 ? channel high speed video driver with 6th order butterworth reconstruction filters on each channel. a first set of 3 ? channel has high definition (hd) 34 mhz filters, one per channel. a fourth channel offers an extra driver for cvbs ? type video signal with an 8 mhz filter. the ncs2584 is in fact a combination of a triple hd video driver plus a single cvbs video driver. in addition, this four channel video driver integrates an auto shutdown function in order to detect the moment when the dac is turned on or off. it also embeds a load detection to lower the power consumption when the tv is unplugged. to further reduce the layout and software complexity, the ncs2584 will automatically turn off without any external command. these features help significantly the systems like blu ? ray ? players or set top boxes to be in line with the restricting energy saving standards on standby modes. it is designed to be compatible with digital ? to ? analog converters (dac) embedded in most video processors. all channels can accept dc or ac coupled signals. in case of ac ? coupled inputs, the internal clamps are enabled. the outputs can drive both ac and dc coupled 150 loads but also two loads of 150 in parallel. features ? 3 high definition filters with 6 th order butterworth filter and 34 mhz bandwidth for ypbpr 1080i ? one cvbs driver including 6th order butterworth 8 mhz filter ? integrated automatic shutdown function to improve power consumption savings when the dac is off ? integrated load detection for tv presence ? low pin count for layout simplification ? internal fixed gain: 6 db 0.2 ? ac or dc coupled inputs and outputs ? each channel capable to drive 2 loads of 150 in parallel ? operating supply voltage range: +3.3 v and 5.0 v ? tssop14 package ? these devices are pb ? free, halogen free/bfr free and are rohs compliant typical application ? set top box decoder ? dvd and blu ? ray player / recorder ? hdtv, home theatre marking diagram http://onsemi.com a, aa = assembly location y = year w = work week = pb ? free package 1 14 tssop ? 14 case 948g ncs 2584 alyw 1 14 see detailed ordering and shipping information in the package dimensions section on page 15 of this data sheet. ordering information *for additional marking information, refer to application note and8473/d. related resource: refer to application note and9046/d for details regarding load detection and application note and8473/d for details on input video signal detection
ncs2584 http://onsemi.com 2 figure 1. pinouts 1 2 3 4 5 6 7 cvbs in hd in1 hd in2 hd in3 gnd nc cvbs out hd out1 hd out2 hd out3 vcc nc nc (top view) 14 13 12 11 10 9 8 nc figure 2. ncs2584 tssop ? 14 block diagram transparent clamp hd in1 hd out1 transparent clamp hd in2 hd out2 transparent clamp hd in3 hd out3 transparent clamp 6 db 8 mhz, 6 th order cvbs in cvbs out ncs2584 shutdown detection 34 mhz, 6 th order 34 mhz, 6 th order 34 mhz, 6 th order 6 db 6 db 6 db 1 2 3 4 14 output load detection 5 6 7 10 9 8 13 12 11 nc nc gnd vcc nc nc
ncs2584 http://onsemi.com 3 tssop ? 14 pin description pin no. name type description 1 cvbs in input cvbs input channel 2 hd in1 input high definition input 1 3 hd in2 input high definition input 2 4 hd in3 input high definition input 3 5 gnd ground ground
ncs2584 http://onsemi.com 4 maximum ratings rating symbol value unit power supply voltages v cc ? 0.3 v cc 5.5 vdc input voltage range v i/o ? 0.3 v i v cc vdc input differential voltage range v id ? 0.3 v i v cc vdc output current (indefinitely) per channel i o 40 ma maximum junction temperature (note 1) t j 150 c operating ambient temperature t a ? 40 to +85 c storage temperature range t stg ? 60 to +150 c thermal resistance, junction ? to ? air r ja 125 c/w esd protection voltage (hbm) v esd 6000 v stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. 1. power dissipation must be considered to ensure maximum junction temperature (t j ) is not exceeded. maximum power dissipation the maximum power that can be safely dissipated is limited by the associated rise in junction temperature. for the plastic packages, the maximum safe junction temperature is 150 c. if the maximum is exceeded momentarily, proper circuit operation will be restored as soon as the die temperature is reduced. leaving the device in the ?overheated? condition for an extended period can result in device burnout. to ensure proper operation, it is important to observe the derating curves. figure 3. power dissipation vs temperature 0 200 400 600 800 1000 1200 1400 0 102030405060708090100 temperature ( c) power dissipation (mv) 1800 1600 ? 40 ? 30 ? 20 ? 10
ncs2584 http://onsemi.com 5 dc electrical characteristics (v cc = +3.3 v, t a = 25 c; unless otherwise specified) symbol characteristics conditions min typ max unit power supply i cc all channel loaded 150 , signal on all inputs, including the load current 73 120 ma i cc sh1 shutdown current, no load, no input signal 5 10 a i cc sh2 shutdown current, no load, with input signal on all inputs 9 40 a i cc sd only the sd channel loaded 150 , signal on all inputs 20 ma i cc hd only the 3 hd channels loaded 150 , signal on all inputs 53 ma dc performance v cm input common mode voltage range v cc = 3.3 v or 5 v gnd 1.4 v pp v oh output voltage high level v cc ? 0.4 v cc ? 0.25 v v ol output voltage low level 280 400 mv i o output current 38 ma ac electrical characteristics for standard definition channels (v cc = +3.3 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit a vsd voltage gain v in = 1 v ? all sd channels 5.8 6.0 6.2 db bw sd low pass filter bandwidth ? 1 db (note 2) ? 3 db 5.5 6.5 7.2 8.0 mhz a rsd stop ? band attenuation stop ? band attenuation (note 2) @ 16 mhz @ 27 mhz 18 43 25 50 db dg sd differential gain error 0.7 % d sd differential phase error 0.7 thd total harmonic distortion v out = 1.4 v pp @ 3.58 mhz 0.35 % x sd channel ? to ? channel crosstalk @ 1 mhz and v in = 1.4 v pp ? 57 db snr sd signal ? to ? noise ratio ntc ? 7 test signal, 100 khz to 4.2 mhz (note 3) 72 db t sd propagation delay @ 4.5 mhz 70 ns gd sd group delay variation 100 khz to 8 mhz 20 ns 2. guaranteed by characterization. 3. snr = 20 x log (714 mv / rms noise)
ncs2584 http://onsemi.com 6 ac electrical characteristics for high definition channels (v cc = +3.3 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit a vhd voltage gain v in = 1 v ? all hd channels 5.8 6.0 6.2 db bw hd low pass filter bandwidth ? 1 db (note 4) ? 3 db 26 30 31 34 mhz a rhd stop ? band attenuation @ 44.25 mhz @ 74.25 mhz (note 4) 8 33 15 42 db thd hd total harmonic distortion v out = 1.4 v pp @ 10 mhz v out = 1.4 v pp @ 15 mhz v out = 1.4 v pp @ 20 mhz 0.4 0.6 0.8 % x hd channel ? to ? channel crosstalk @ 1 mhz and v in = 1.4 v pp ? 60 db snr hd signal ? to ? noise ratio white signal, 100 khz to 30 mhz, (note 5) 72 db t hd propagation delay 25 ns gd hd group delay variation from 100 khz to 30 mhz 10 ns 4. guaranteed by characterization. 5. snr = 20 x log (714 mv / rms noise) timing characteristics (v cc = +3.3 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit t on turn on time (note 6) 2 10 s t off turn off time when 0 v detected on inputs 200 400 s 6. guaranteed by characterization.
ncs2584 http://onsemi.com 7 dc electrical characteristics (v cc = +5 v, t a = 25 c; unless otherwise specified) symbol characteristics conditions min typ max unit power supply i cc all channel loaded 150 , signal on all inputs, including the load current 88 120 ma i cc sh1 shutdown current, no load, no input signal 7 10 a i cc sh2 shutdown current, no load, with input signal on all inputs 11 40 a i cc sd only the sd channel loaded 150 , signal on all inputs 22 ma i cc hd only the 3 hd channels loaded 150 , signal on all inputs 66 ma dc performance v cm input common mode voltage range v cc = 3.3 v or 5 v gnd 1.4 v pp v oh output voltage high level v cc ? 0.4 v cc ? 0.25 v v ol output voltage low level 280 400 mv i o output current 38 ma ac electrical characteristics for standard definition channels (v cc = +5 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit a vsd voltage gain v in = 1 v ? all sd channels 5.8 6.0 6.2 db bw sd low pass filter bandwidth ? 1 db (note 7) ? 3 db 5.5 6.5 7.2 8.0 mhz a rsd stop ? band attenuation stop ? band attenuation (note 7) @ 16 mhz @ 27 mhz 18 43 25 50 db dg sd differential gain error 0.7 % d sd differential phase error 0.7 thd total harmonic distortion v out = 1.4 v pp @ 3.58 mhz 0.35 % x sd channel ? to ? channel crosstalk @ 1 mhz and v in = 1.4 v pp ? 57 db snr sd signal ? to ? noise ratio ntc ? 7 test signal, 100 khz to 4.2 mhz (note 8) 72 db t sd propagation delay @ 4.5 mhz 70 ns gd sd group delay variation 100 khz to 8 mhz 20 ns 7. guaranteed by characterization. 8. snr = 20 x log (714 mv / rms noise)
ncs2584 http://onsemi.com 8 ac electrical characteristics for high definition channels (v cc = 5 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit a vhd voltage gain v in = 1 v ? all hd channels 5.8 6.0 6.2 db bw hd low pass filter bandwidth ? 1 db (note 9) ? 3 db 26 30 31 34 mhz a rhd stop ? band attenuation @ 44.25 mhz @ 74.25 mhz (note 9) 8 33 15 42 db thd hd total harmonic distortion v out = 1.4 v pp @ 10 mhz v out = 1.4 v pp @ 15 mhz v out = 1.4 v pp @ 20 mhz 0.4 0.6 0.8 % x hd channel ? to ? channel crosstalk @ 1 mhz and v in = 1.4 v pp ? 60 db snr hd signal ? to ? noise ratio white signal, 100 khz to 30 mhz, (note 10) 72 db t hd propagation delay 25 ns gd hd group delay variation from 100 khz to 30 mhz 10 ns 9. guaranteed by characterization. 10. snr = 20 x log (714 mv / rms noise) timing characteristics (v cc = +5 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified) symbol characteristics conditions min typ max unit t on turn on time (note 11) 2 10 s t off turn off time when 0 v detected on inputs 200 400 s 11. guaranteed by characterization.
ncs2584 http://onsemi.com 9 typical characteristics v cc = +3.3 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 30 100k 1m 10m 100m ? 1 db @ 7.2 mhz ? 3 db @ 8.5 mhz ? 47 db @ 27 mhz frequency (hz) normalized gain (db) figure 4. sd normalized frequency response 100k 1m 10m 100m 20 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 30 normalized gain (db) frequency (hz) figure 5. hd normalized frequency response ? 1 db @ 29 mhz ? 3 db @ 33 mhz ? 16 db @ 44.25 mhz ? 38 db @ 74.25 mhz gain (db) frequency (hz) figure 6. channel ? to ? channel crosstalk 1.e+04 1.e+05 1.e+07 1.e+06 1.e+08 ? 34.6 db @ 23 mhz ? 55 db @ 50 khz 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 frequency (hz) figure 7. hd normalized group delay 60 10 ns @ 24 mhz group delay (ns) 50 40 30 20 10 0 1.e+05 1.e+07 1.e+06 1.e+08
ncs2584 http://onsemi.com 10 typical characteristics v cc = +3.3 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified figure 8. sd propagation delay figure 9. hd propagation delay figure 10. sd small signal response figure 11. hd small signal response output input 70 ns 0.7 v pp 0.7 v pp 25 ns input output 200 mv output input 200 mv input output figure 12. sd large signal response figure 13. hd large signal response output input 1 v pp 1 v pp output input
ncs2584 http://onsemi.com 11 typical characteristics v cc = +3.3 v, v in = 1 v pp , r source = 75 , t a = 25 c, inputs ac ? coupled with 0.1 f, all outputs ac ? coupled with 220 f into 150 referenced to 400 khz; unless otherwise specified figure 14. sd frequency response and group delay figure 15. hd frequency response and group delay 20 400k 1m 10m 50m 400k 1m 10m 100m 20 normalized gain (db) normalized gain (db) (hz) (hz) 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 60 50 40 30 20 10 0 ? 10 ? 20 ? 30 ? 40 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 normalized group delay (ns) normalized group delay (ns) 35 30 25 20 15 10 5 0 ? 5 ? 10 ? 15 figure 16. sd and hd v cc psrr vs. frequency 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 psrr (db) frequency (hz) 1.e+04 1.e+05 1.e+07 1.e+06 1.e+08 0.25 1st 2nd 3rd 4th 5th 6th harmonic differential gain (%) figure 17. sd differential gain harmonic figure 18. sd differential phase 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 differential phase ( ) 0.2 0.15 0.1 0.05 0 ? 0.05 0 1st 2nd 3rd 4th 5th 6th 0
ncs2584 http://onsemi.com 12 applications information the ncs2584 quad video driver has been optimized for standard and high definition video applications covering the requirements of the standards composite video (cvbs), component video (720p/1080i). the three hd channels have 34 mhz filters to cover high definition ? like video applications. a fourth channel implements one standard definition filter of 8 mhz bandwidth to drive the cvbs signal. in the regular mode of operation, each channel provides an internal voltage ? to ? voltage gain of 2 from input to output. this effectively reduces the number of external components required as compared to discrete approach implemented with stand alone op amps. an internal level shifter is employed shifting up the output voltage by adding an offset of 280 mv on the outputs. this prevents sync pulse clipping and allows dc ? coupled output to the 150 video load. in addition, the ncs2584 integrates a 6 th order butterworth filter for each. this allows rejection of the aliases or unwanted over-sampling effects produced by the video dac. similarly for the case of dvd recorders which use a adc, this anti ? aliasing filter (reconstruction filter) will avoid picture quality issue and will help filtration of parasitic signals caused by emi interference. figure 19. ac ? coupled configuration at the input and output vcc cvbs in gnd cvbs out 75 75 75 rs video processor y / g pb / b pr / r cvbs v cc hd in1 hd in2 hd in3 hd out1 hd out2 hd out3 rs rs 0.1 f 220 f 220 f 0.1 f 0.1 f 0.1 f 220 f 220 f 10 f 0.1 f 75 rs 10 1 2 3 4 5 14 13 12 11 tv 75 75 75 75 a built ? in diode ? like clamp is used into the chip for each channel to support the ac ? coupled mode of operation. the clamp is active when the input signal goes below 0 v. the built ? in clamp and level shifter allow the device to operate in different configuration modes depending on the dac output signal level and the input common mode voltage of the video driver. when the configuration is dc ? coupled at the inputs and outputs, the 0.1 f and 220 f coupling capacitors are no longer used, and the clamps are in that case inactive; this configuration provides a low cost solution which can be implemented with few external components (figure 19). it also require the user the ensure the input voltage range stays within 0 v to 1.4 v. the input is ac ? coupled when either the input ? signal amplitude goes over the range 0 v to 1.4 v. activating the clamp becomes mandatory and the use of the 0.1 f is necessary. the output ac ? coupling configuration is advantageous for eliminating dc ground loop with the drawback of making the device more sensitive to video line or field tilt issues. in some cases, it may be necessary to increase the nominal 220 f capacitor value. meanwhile the ac coupling configuration ensures the maximum compatibility with all sorts of displays. shutdown mode the ncs2584 integrates a shutdown mode function which allows the device to detect when the video dac turns on or off. when the video dacs turn on, the video drivers will turn on on as soon as they detect a stimulus. meanwhile if any glitch happens on the input line, embedded filters will ignore them to prevent undesired behavior. in this case, the turn on time is typically around 2 s to avoid any missing information. when the chipset turns on, it has to go through a boot sequence which is significantly longer than this turn on time. then, the video drivers will go to a shutdown mode in order to significantly lower the power consumption only when no more stimulus is detected from the video dacs. in addition, the ncs2584 integrates also a load detection function. it only occurs on the cvbs which is an independent signal and the fist hd channel which contains the synchronization information. it identify when the user plugs the analog video lines of the tv or not. if these are not plugged, then the device goes into a standby mode to reduce the power consumption of the system. the device is in fact
ncs2584 http://onsemi.com 13 capable of recognizing the load of the tv. with the energy star ? requirements, these innovative and patented features will perfectly fit with the power saving specifications. dc ? coupled output the outputs of the ncs2584 can be dc ? coupled to a 150 load (figure 20). this has the advantage of eliminating the ac ? coupling capacitors at the output by reducing the number of external components and saving space on the board. this can be a key advantage for some applications with limited space. the problems of field tilt effects on the video signal are also eliminated providing the best video quality with optimal dynamic or peak ? to ? peak amplitude of the video signal allowing operating thanks to the built ? in level shifter without risk of signal clipping. in this coupling configuration the average output voltage is higher than 0 v and the power consumption can be a little higher than with an ac ? coupled configuration. figure 20. ac ? coupled input and dc ? coupled output configuration vcc cvbs in gnd cvbs out 75 75 75 rs video processor y / g pb / b pr / r cvbs v cc hd in1 hd in2 hd in3 hd out1 hd out2 hd out3 rs rs 75 0.1 f 0.1 f 0.1 f 0.1 f 10 f 0.1 f 75 rs 75 75 75 10 1 2 3 4 5 14 13 12 11 tv figure 21. dc ? coupled inputs and ac ? coupled outputs vcc cvbs in gnd cvbs out 75 75 75 rs video processor y / g pb / b pr / r cvbs v cc hd in1 hd in2 hd in3 hd out1 hd out2 hd out3 rs rs 220 f 220 f 220 f 220 f 10 f 0.1 f 75 rs 10 1 2 3 4 5 14 13 12 11 tv 75 75 75 75
ncs2584 http://onsemi.com 14 figure 22. dc ? coupled inputs and outputs vcc cvbs in gnd cvbs out 75 75 75 rs video processor y / g pb / b pr / r cvbs v cc hd in1 hd in2 hd in3 hd out1 hd out2 hd out3 rs rs 10 f 0.1 f 75 rs 10 1 2 3 4 5 14 13 12 11 figure 23. ncs2584 driving 2 loads in parallel for scart applications vcc cvbs in gnd cvbs out rs video processor y / g pb / b pr / r cvbs v cc hd in1 hd in2 hd in3 hd out1 hd out2 hd out3 rs rs 0.1 f 0.1 f 0.1 f 0.1 f 10 f 0.1 f rs 10 1 2 3 4 5 14 13 12 11 220 f 220 f 220 f 220 f 220 f 220 f 220 f 220 f 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 tv 75 75 75 75 tv
ncs2584 http://onsemi.com 15 video driving capability with an output current capability of 40 ma the ncs2584 was designed to be able to drive at least two video display loads in parallel. this type of application is illustrated in figure 23. figure 24 (multiburst) and figure 25 (linearity) show that the video signal can efficiently drive a 75 equivalent load and not degrade the video performance. esd protection all the device pins are protected against electrostatic discharge at a level of 6 kv following hbm jedec standards. t his feature has been consid ered with a particular attention with esd structure able to sustain the typical values requested by the systems like set top boxes or blue ? ray players. this parameter is particularly important for video driver which usually constitutes the last stage in the video chain before the video output connector. figure 24. multiburst test with two 150 loads figure 25. linearity test with two 150 loads ordering information device package shipping ? NCS2584DTBR2G tssop ? 14 (pb ? free) 2500 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
ncs2584 http://onsemi.com 16 package dimensions tssop ? 14 case 948g issue b dim min max min max inches millimeters a 4.90 5.10 0.193 0.200 b 4.30 4.50 0.169 0.177 c ??? 1.20 ??? 0.047 d 0.05 0.15 0.002 0.006 f 0.50 0.75 0.020 0.030 g 0.65 bsc 0.026 bsc h 0.50 0.60 0.020 0.024 j 0.09 0.20 0.004 0.008 j1 0.09 0.16 0.004 0.006 k 0.19 0.30 0.007 0.012 k1 0.19 0.25 0.007 0.010 l 6.40 bsc 0.252 bsc m 0 8 0 8 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimension a does not include mold flash, protrusions or gate burrs. mold flash or gate burrs shall not exceed 0.15 (0.006) per side. 4. dimension b does not include interlead flash or protrusion. interlead flash or protrusion shall not exceed 0.25 (0.010) per side. 5. dimension k does not include dambar protrusion. allowable dambar protrusion shall be 0.08 (0.003) total in excess of the k dimension at maximum material condition. 6. terminal numbers are shown for reference only. 7. dimension a and b are to be determined at datum plane ? w ? . s u 0.15 (0.006) t 2x l/2 s u m 0.10 (0.004) v s t l ? u ? seating plane 0.10 (0.004) ? t ? ??? ??? ??? section n ? n detail e j j1 k k1 ? w ? 0.25 (0.010) 8 14 7 1 pin 1 ident. h g a d c b s u 0.15 (0.006) t ? v ? 14x ref k n n 7.06 14x 0.36 14x 1.26 0.65 dimensions: millimeters 1 pitch *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint*
ncs2584 http://onsemi.com 17 on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other intellectual property. a list ing of scillc?s product/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parame ters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 ncs2584/d blu ? ray and blu ? ray disc are trademarks of blu ? ray disc association. energy star and the energy star mark are registered u.s. marks. literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative

▲Up To Search▲

Price & Availability of NCS2584DTBR2G

	To Download NCS2584DTBR2G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .